Pro Series Round, A-Frame Jack - Topwind - 15" Lift - 2,000 lbs
(797 reviews)
Price: $50.32
In Stock
Pro Series Round, A-Frame Jack - Topwind - 15" Lift - 2,000 lbs
Item # PS1401000303
Retail:$64.16
Our Price: $50.32
You Save: 22%
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (797)
- Q & A (0)
- Videos (2)
- Photos
- Used (1)
Pro Series Trailer Jack - PS1401000303
- 1001 - 2000 lbs
- Car Hauler
- Enclosed Trailer
- Utility Trailer
- Topwind Jack
- Leveling Jacks
- Tongue Jacks
- Bolt-On
- Weld-On
- No Wheel or Foot
- Pro Series
- 15 Inch Lift
- Steel
Ideal for multiple agricultural and commercial applications, this standard A-frame jack features a 5-1/2" retracted height and measures 16" from the mounting bracket to the top, excluding the handle. Base sold separately.
Features:
- Utility jack is perfect for agricultural and commercial applications
- Precision-fit parts provide exceptional stability and reliability
- Weld-on/bolt-on bracket mounts to any standard A-frame coupler
- Outer and inner tubes have black paint finish
- Topwind handle has smooth, ergonomic design for easy cranking
- Footplate or caster assembly sold separately
Specs:
- Bracket height:
- 5-1/2" Retracted
- 20-1/2" Extended
- Lift: 15"
- Clearance: 16" from mounting bracket to top of jack
- Handle radius: 6-3/4"
- Inner tubing diameter: 2"
- Outer tubing diameter: 2-1/4"
- Lift capacity: 2,000 lbs
- Limited 1-year warranty
1401000303 Pro Series Round A-Frame Jack - Topwind - 15" Travel - 2,000 lbs
California residents: click here
Video of Pro Series Round, A-Frame Jack - Topwind - 15" Lift - 2,000 lbs
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Pro Series Trailer Jack - A-Frame Jack - PS1401000303 Review
Today, were going to review part number PS1401000303. This is the Pro Series Round, A-Frame Topwind Jack. This has a lift capacity of 2,000 pounds. This standard A-Frame Jack would make a good utility jack which is perfect for agricultural and commercial applications. It does use precision-fit parts which will provide exceptional stability and reliability. It does have a triangular-mounting bracket right here, which was made to fit any standard A-Frame trailer.
It can be welded on or using the three elongated holes, it can also be bolted on. Now, the distance between these holes from the center to the center of each hole is 3 inches and that is the industry standard. So, normally if a trailer has an A-Frame jack with the three holes in it, they should be at the 3-inch industry standard. The outer and the inner tubes have a black paint finish. The topwind handle which is right here at the top of the jack has a smooth ergonomic design for easy cranking.
This jack does not come with any base assembly. That is sold separately. You would have a choice of a footplate or a wheel caster assembly. I do want to give you a few dimensions on this. The clearance which is the measurement from the mounting bracket to the top of the jack on this one would be 16 inches.
Now, this jack is in the fully retracted position, so the measurement from the bottom of the tube to the mounting bracket in the fully retracted position would be 5-1/2 inches. Now, if we crank that all the way out -- to save time I have one here already extended out. This jack is in the fully extended position, so that measurement would be 20-1/2 inches. Basically, this jack would have a lift of 15 inches which is basically the retracted dimension of 5-1/2 subtracted from the extended dimension of 20-1/2 to give you a lift of 15. The inner tubing, this part right here, is a 2-inch diameter tubing.
The outer tubing is 2-1/4 inch diameter, and again this has a lift capacity of 2,000 pounds. It has a limited one-year warranty. I just wanted to give you an example of a few of the base assemblies that you can purchase separately that would work on this. The first one is a footplate, which would be part number PS1400700340. Basically, you take the pin and clip out and align the holes in the inner tube with the holes in the footplate. You go ahead and run the pin through, lock it on with the clip and you would have a footplate on this jack. Now, the other base you could put on this, if you want to make it a mobile base, would be a wheel caster assembly, which is this part right here, again, sold separately would be PS1400750340. It attaches the same way. You remove the pin and clip, align the holes with the holes in the inner tube, put the pin through, put the safety clip on and now you would have a jack with a wheel caster assembly on the bottom of it. Again, that should do it for the review on part number PS1401000303.
Customer Satisfaction Score:
99% were satisfied with this product
1% of customers were not satisfied
- Wrong item was ordered
- Defective
Customer Reviews
Pro Series Round, A-Frame Jack - Topwind - 15" Lift - 2,000 lbs - PS1401000303
Average Customer Rating: 4.8 out of 5 stars (797 Customer Reviews)
Ideal for multiple agricultural and commercial applications, this standard A-frame jack features a 5-1/2" retracted height and measures 16" from the mounting bracket to the top, excluding the handle. Base sold separately.by: Rick05/11/2013
The perfect jack for low clearance trailers! I had trouble finding a jack for my bumper pull horse trailer that wouldn't drag the ground pulling into gas stations, parking lots, etc. I looked at all the farm and home stores in my area with no luck. I thought maybe it didn't exist...then I found etrailer. The short extension below the mount on this jack was exactly what I needed! When fully retracted, it extends no lower than the hitch. I gained five inches from the previous jack. Great peace of mind when traveling and much less worry about dragging when I need all the clearance I can get! Thanks etrailer...and the video was excellent in helping me make sure I was getting what I wanted!
by: Chuck07/02/2018
Nice addition to my trailer. I spent a lot of time looking for a jack with a short "hang down " distance from the frame to the ground. This one is perfect. The trailer rides low and will bottom out without a short "hang down".
Chuck H.
7/2/2019
Still working as it should. I did have to replace the red knob on the crank. I just disappeared at the end of a trip. I found a replacement at [local retail store]. Other than that, it has performed flawlessly thru a pretty tough winter.
by: Glenn11/22/2023
Great HD jack for my trailer. Really like the top crank handle.
by: Laurence10/25/2022
Received the jack today. Installed the jack today. That process went as expected. I was able to reuse the castor and footplate from the precious RAM jack - saved some money there. The handle operates very smoothly. The 5-1/2" Retracted bracket height going to be a big improvement.
by: Sharp Ranches - Burns, OR10/16/2014
An Excellent Choice! The short retracted extension of the PS1401000303 makes this A-frame jack a perfect aftermarket upgrade to replace bumper-pull trailer OEM jacks that eventually become "ground-whacked" when pulling through road or trail dips. The ranch has twice replaced this trailer's longer extension OEM jacks, but we're confident the new Pro Series jack design will make this "third time a charm" in replacement performance! It's a quality built product at a very good price.
by: Gano C10/07/2013
I needed a jack that when fully retracted would set the foot closer to the mount than the one that came with the trailer, because my drive has a upward slope and the jack would drag. This jack retracts at least 4 inches more than the stock jack, so should clear the pavement. The movement is smooth and easy to operate, although it does take a bit longer to bring up or down. The mounting holes are a bit larger than the holes in the stock unit, but heavy washers allowed use of the stock mounting bolts. Removal of the old unit and installation of this one took about 10 minutes. Because of the slope of the drive, I need to use blocks under the jack to allow me to get the hitch ball under the trailer hitch, but I had to do that with the old jack. Etrailer upgraded the shipping from what I ordered and at that the order arrived a day earlier than they estimated. All in all, I am pleased with the product and with the purchasing experience from etrailer.
by: Brandon05/03/2018
This jack seems nice and well built. It replaced an old top wind jack that got hung up in a road transition. This jack sucks up to the bottom of the trailer tighter and sticks up a little higher on top to clear my toolbox. The old jack was welded on, so I had to cut it off and bolt this one on after drilling holes. Has standard 3" bolt hole spacing and uses the industry standard 3/8 bolts.
by: Jean01/10/2015
I ordered this jack because I have a tongue box on the trailer and needed a jack with enough clearance (used to have an electric jack but that died). Installed this jack today and am very pleased with it, I find the top wind easier to use than the side wind ones.
by: Ron B09/05/2013
This is exactly what I needed. My problem was my flip up jack didn't go down low enough to allow the trailer tongue to reach the ball on my 4 wheeler (that I use to transit our trailer from storage). Service and contact from etrailer was superb!
Thanks guys.
by: Sharon 02/08/2024
Use this jack all the time
by: DC05/29/2015
Appears to be very beefy construction. Paint and overall appearance is nice. The short retracted height of this jack make it ideal for low hitch/low tongue situations like mine. Excellent price, though I can't say the same about shipping. What I love about etrailer is that they provide the pertinent measurements to see if you have adequate clearance and proper extension for your application. Many of those other stores that sell trailer parts appear to have no clue what they are selling, and that has to be frustrating to consumers who think these are a "standard size." Of course, they're not.
Dan A.
5/29/2016
As great now as it was on day 1. Youll love this tongue jack!
by: Michael 12/06/2023
Super fast shipping! This jack is perfect for my low hauler
by: Greg R.04/15/2014
I ordered this trailer jack because it has a tall clearance. I have a tongue box for my cargo trailer and I could not install it with the factory jack. This jack still has a couple of inches of overlap with the box, but the handle is designed in such a way that it can work cleanly. The only problem is that the outer shell of the jack needed to be about a quarter inch longer at the bottom to clear the bottom plate. But it still works fine.
Greg R.
4/15/2015
One year later, I have no complaints. The jack is still working fine.
by: Mike B09/08/2017
Install took 15 minutes. This Jack is allot heftier than the oem Jack. I want to say that I thank George at etrailer, he upgraded my shipping to 3 day at no charge to me. Now that is what I call great customer service!
Thank you George. I'll be buying all of my needs for my trailer from etrailer.com.
Mike B.
9/8/2018
Yep, still using them. Both are great. Just sold my pop up camper last weekend and am looking for a larger trailer. Honestly, here in the area around Denver the trailer sales people and companies are very dishonest, and shady characters.
by: floodstage06/24/2015
Just put it on. Seems fine.
Won't know if it holds up until it's been there for a while, but the etrailer's site begged for a review, so here is a review.
It's the right size. It installed fine and it looks good.
Have no idea how long it will last. Hopefully a long time.
yay
Floodstage
6/23/2016
Still working fine a year later
by: Dave B06/08/2016
This is the jack that I replaced my OEM jack. It has a much shorter retracted length and doesn't have clearance issues when traveling. Once I park, I add the detachable 6 inch foot to make up the length. It works smoothly and easily and the top wind seems easier/faster to use than the original side winder.
Dave B.
6/14/2017
WORKING PERFECT!
by: bobt08/04/2015
Bought this jack as a replacement for one that was damaged when it bottomed out on a dip in the pavement coming out of a gas station. The extra 2 inches of clearance on the bottom end should keep that from happening again. The jack arrived in good condition and installed in less than 10 minutes. Haven't been out on the road with it yet but so far so good!
Bobt
8/3/2016
After a years use, the jack is still functioning well. No more encounters with the road causing damage.
by: Allen08/13/2013
Great products, easy transaction, fast shipping. Also purchased swivel wheel and two fenders for this project! Will send picture of home build utility trailer when completed. Thanks again, Allen
Allen
2/11/2015
The trailer project was completed and the jackwheel assembly works great. You had a very good competitive pricing on both items. Thanks again!
by: Mike04/14/2017
My original trailer jack hung down so low, i bent it on the way home from buying the trailer new, then a half a dozen more times in the next month or so.
This jack lifts the foot up well out of harms way. A year later and an abnormally high amount of urban driving where this stuff tends to go wrong...I haven't bumped or bent it yet!
On the flip side, with biased up so high, it's easy to run out of jack travel when unhitching on uneven ground. I always just use a 3x3" fence post off-cut under the jack foot.
by: Jake H05/01/2016
My tent trailer needed a new jack a LONG time ago and I finally installed this one last year. This jack operates smooth and easily. I also bought a wheel to go on it so I can push the little tent trailer around in tight camp sites. I had to grind a bit of the edge of the mounting plate down to get it to fit on the tongue of my trailer. No big deal since I have the tools (and a bit of black paint) but I'm sure this wouldn't be needed on most trailers. Great product and customer service!
by: Keith W.02/09/2017
Seems like a well built/well designed jack. Quality of workmanship and finish seem great. Solid handle/solid construction. Haven't installed it yet so can't comment on durability but seems to operate as expected.
Keith W.
2/9/2018
Yes, Im very happy with the jack, it works well for our design. I was curious if you had a similar model jack but one that offers a greater lift height 16-18? It seems most jacks of this style cutoff at 15 lift.
Rachael H.
2/9/2018
Thanks for the follow up Keith. I have provided a link to another trailer jack that has a different design that offers up to 27-1/2 inches of lift # 322-RDJ-2K. Other than that yes most of our other jacks to max out at about 15 inches of lift for the 2,000 pound capacity and topwind style.
Helpful Links
Keith W.
2/9/2018
Rachael, This looks great! Thanks a lot for the alternative choice. Ill place an order for one of these in the near future and see if itll work for us. I appreciate the follow up as well
by: Steven Lemm02/23/2017
When the situation stopped being excellent, it turned into fabulous. You just can not go wrong with etrailer. Great job guys, keep up the good work.
Steven L.
2/23/2018
Could not be better.
by: Andy B.08/28/2016
Easy install and smooth turning. My old one's handle broke and it had been quite "jerky" for some time. This jack is far superior to what I had on my old 10' enclosed Haulmark.
Andy B.
11/1/2017
Still working flawlessly. Definitely a quality product.
by: Mark W.07/08/2015
This is a good trailer jack for vehicles that have a low slung tow bar (like my 2006 Honda Odyssey). It retracts to about 5 1/2" from the base of the jack. The jack stand that came with my Riverside Retro 166 trailer did not retract as much and hit the ground coming out of normal slope driveways. Also, because this jack is about 15 1/2" high, vehicles with hatchback doors (like my Odyssey) may hit the top of the jack - mine clears it by 1/4".
My only complaint is that the workmanship was a little sloppy, but it did what I needed it to do.
by: Howard H.07/20/2014
I placed my order on July 3 knowing that it was a Holiday weekend. I immediately received an email confirmation and shipping date for my merchandise. UPS delivered the order on the following Wednesday. Everything arrived in good order and is working perfect. I am extremely happy and satisfied with the product and service. Thank you again.
Howard H.
7/20/2015
Wonderful
25
797
Show More Reviews
See what our Experts say about this Pro Series Trailer Jack
- Torque Value for Installing A-Frame Pro Series Trailer JackI checked with Pro Series and for installing the Pro Series Jack part # PS1401000303 they recommend 15-20 ft lbs of torque for the hardware that holds the jack to the trailer. I attached a picture that has the complete install instructions for you to check out.
view full answer...
- Caster Wheel Compatible with Pro Series Round A-Frame Trailer JackThe Pro Series Round, A-Frame Jack # PS1401000303 can be used as it comes, with a 6 inch caster wheel # PS1400750340, or with a foot plate # PS1400700340.
view full answer... - What are The Dimensions of the Jack Housing On The Pro Series Trailer Jack, # PSEA20000103On the Pro Series Trailer Jack, # PSEA20000103, the measurement from the the mounting bracket to the top of the housing is 11 inches. The measurement of just the jack housing below the mounting plate is 7 inches. The jack will stick out another inch on the bottom housing when fully retracted. I also have the Pro Series Trailer Jack, # PS1401000303, which is a topwind, 2,000 lbs. jack. It measures 16 inches from the mounting bracket to the top of the housing. The measurement of the jack...
view full answer... - Leg Recommendation for a Pro Series Jack part # PS1401000303For a detachable foot plate for the Pro Series Jack part # PS1401000303 that you referenced you would want the part # PS1400700340 or for a wheel caster you would want part # PS1400750340. .
view full answer... - Removing Caster of Bulldog Rack-and-Gear Jack # BD162300According to Bulldog, the caster wheel of the # BD162300 could theoretically be removed, but it is not recommended. If the bolt holding the caster is removed, and the caster is slid off the tube of the jack, there are washers and ball bearings that will fall out of the bottom of the jack that will be very difficult to replace. This jack was not designed to have the caster removed and replaced with a foot plate. The Pro Series # PS1401000303 might be a good option. From the mounting bracket...
view full answer... - Troubleshooting Squeaking On Pro Series Round, A-Frame JackSince I'm not entirely sure where the squeaking is coming from on your # PS1401000303, I would say start by following the maintenance in the manual. Since this is a topwind jack you want to apply a lightweight oil to the screw stem on the top. Adding grease is not a part of the maintenance for topwind models. If you add oil and that doesn't fix it you could try inserting grease from the bottom of the jack and spread it on the jack screw. If that doesn't fix it or it continues to get worse...
view full answer... - A-Frame Jack Recommendation Where Jack Handle Space is LimitedWhile we don't have a jack that has a removable handle I believe I have a solution for you. It sounds like you have limited clearance for using the handle of your trailer jack. A jack like the Pro Series Jack part # PS1401000303 has a handle that allows you to swivel it and get it around obstructions like a propane tank. I attached a review video for you to check out as well.
view full answer... - Trailer Jack Recommendation for an A-Frame TrailCruiser Trail-Lite 21RBHThe difference between 5-1/2 inches and 5-2/5 inches is 1/10 of an inch and would most likely not make a noticeable difference. However, if you were looking for the absolute shortest retracted distance you would want the Bulldog Round, A-Frame Jack, part # BD155033. I went out into our warehouse and compared this jack with the Pro Series Round, A-Frame Jack, part # PS1401000303, and found it to be the shorter of the two. You may be interested in purchasing a Bulldog Removable wheel, part...
view full answer... - Tube Dimensions of the Pro Series Jack # PS1401000303The inner tube diameter of the part # PS1401000303 that you referenced is 2 inches. The outer tube has a diameter of 2-1/4 inches. I attached a review video for this jack for you to check out as well. The footplate # PS1400700340 and wheel caster part # PS1400750340 have an inner diameter of 2 inches.
view full answer... - Length of the Outer Tube Below the Mounting Bracket, Pro Series A-Frame Trailer Jack # PS1401000303The bottom of the outer tube, below the mounting bracket on the Pro Series A-Frame Jack, # PS1401000303, is 3 inches long. This is going to be the shortest distance of any of the A-frame trailer jacks. One option is to remove the bottom plate that is smaller and replace it with one that will fit like # BD003135.
view full answer... - Small Diameter Jack Caster Wheel Needed to Raise Rear of Horse TrailerI have looked through the various jack casters we offer, and a 6 inch diameter wheel is the smallest one that is offered. It sounds to me as if you need a jack that has a shorter distance between the bottom of the mount and the bottom of the outer tube, in order to bring up the rear of your trailer. (See photo.) Since your jack is most likely an A-frame mount, the Pro Series # PS1401000303 jack has the lowest mount height of any of our 2000 lb jacks at about 3-1/4 inches. If you do not...
view full answer...
- Distance From Bottom of Mounting Bracket to Bottom of Outer Tube of Pro Series Jack PS1401000303From the bottom of the mounting bracket down to the bottom of the outer tube measures 3-1/2 inches on the Pro Series jack part # PS1401000303 that you referenced.
view full answer... - Bulldog Rack and Gear Jack WeightsThe Pro Series Round Jack part # PS1401000303 weighs 11 lbs. The 1,200 lb capacity rack and gear jack part # BD165411 also weighs 14 lbs.
view full answer... - Pro Series Round, A-Frame Jack # PS1401000303 Recommendation for a Trailer with Low Tongue ClearanceI think the best option for your trailer would be a Pro Series Round, A-Frame Jack # PS1401000303. This jack has a retracted height of 5-1/2 inches to give you additional clearance when you are traveling on uneven terrain. This jack also has 2,000 lb capacity, but since you said you only get near that capacity and not over you should be fine.
view full answer... - Trailer Jack Recommendation for a Trailer that Drags A-Frame Jack on Steep DrivewaysThe shortest jack we have that is designed to fit an A-Frame trailer mounting bracket is the part # PS1401000303 that has a distance of 5-1/2 inches from the bottom of the mounting bracket to the bottom of the jack when fully retracted. A better solution for you would be to go with a swivel jack that can swivel out of the way when and not interfere at all with your driveway. A jack like the part # PSEJ10000101 would work well. This jack will attach to the frame of your trailer and will...
view full answer... - A-Frame Jack to Replace 2,000 lb Capacity Jack Made By CequentWe have 2,000 lb A-frame jacks made by the same parent company Cequent that your jack was made by with the Pro Series jack part # PS1401000303 which is a topwind. I attached a review video for more info on this as well.
view full answer... - What is Meant by 15-Inches of Travel for Pro Series Round A-Frame Jack PS1401000303Pro Series Round A-Frame Jack # PS1401000303 does offer 15-inches of travel (or lift) and this is simply the difference between the fully retracted and fully extended lengths. This jack can lift up to 2000-lbs and if you like you can add a caster wheel like # PS1400750340 which drops the jack rating to 1200-lbs or a standard foot plate # PS1400700340 which lets you keep the full 2K capacity. You could even take a look at the Fastway Flip Automatic Fold-Up Jack Foot for 2-1/4" Jacks -...
view full answer... - Recommended Trailer A-Frame Coupler and Jack for Coleman Royale Destiny Pop-Up CamperFor your son's Coleman Royale Destiny Pop-up, I recommend the Demco A-Frame Trailer Coupler w/ Jack Hole - eZ-Latch - Black - 2" Ball - Bolt On - 10K # DM14793-81 because it is an easy bolt on installation for 2 inch hitch ball compatibility. A more economical option is the weld on A-Frame Trailer Coupler - Yoke Latch - Black - 2" Ball - Weld On - 8,000 lbs # CA-5210-B. Both have the trailer jack attachment point for easy mounting of your jack to raise and lower the trailer tongue. For...
view full answer... - Height of Buyers Products A-Frame Jack # 3370091265 without HandleI went out to our warehouse to take a look at the Buyers Products A-Frame Jack # 3370091265 referenced in your question. I measured a height from the mounting bracket up to the top of the tube (before the handle) of just about 9-1/2 inches. I have attached an image to assist. To get the clearance measurement you're needing you likely will need to move down to a 2,000 pound topwind jack (if possible for your trailer's tongue weight). For this I recommend taking a look at the Pro Series...
view full answer...
- Replacement A-Frame Jack for Forest River A-Frame Pop Up Trailer 17I pulled up pictures of your Forest River A-Frame pop up trailer 17 and it has a very standard a-frame jack on it that we can easily help you replace. The trailer does seem to have a very low ground clearance so that would be the most important feature to accommodate. Take a look at Pro Series jack # PS1401000303. The mounting bracket is very low relative to the bottom of the jack tubes, 5-1/2 inches. You can use footplate, # PS1400700340 and wheel # PS1400750340. The wheel is rated for...
view full answer... - Looking for A-Frame Trailer Jack That Retracts Enough to Clear Driveway ApronsSwivel jacks do not work well with A-frame trailers, so a swivel jack would not be a good choice. Your best bet would be to stay with an A-frame jack. I would recommend finding the jack with the lowest possible retracted height. For instance, the Pro Series # PSEA20000103 you mentioned has a retracted height of 8 inches, which would be the distance between the bottom of the jack tube and the mounting bracket. The Pro Series # PS1401000303 has the same 2000 lb capacity as the jack you mentioned,...
view full answer...
- Low Clearance A-Frame Trailer Jack that Can be Fitted with a Wheel or FootplateThe footplate for Bulldog rack and gear jack # BD018520 is welded to the foot and cannot be removed but I do have some recommendations for you. First, take a look at Pro Series jack # PS1401000303. The mounting bracket is very low relative to the bottom of the jack tubes, 5-1/2 inches. You can use footplate, # PS1400700340 and wheel # PS1400750340. The wheel is rated for 1,200 pounds so it would limit the jack capacity to 1,200 pounds also. And we also have Bulldog jack # BD155033 with...
view full answer... - A-Frame Jack Recommendation for a 2002 Hallmark Twin Axle Enclosed Motorcycle TrailerThe Pro Series Trailer Jack # PS1401000303 would be a great jack for you. This A-frame jack has a 2,000 lb capacity which would be more than enough for you trailer, and the retracted height of the hitch under the mounting bracket would be about 4 inches so you would have much more clearance than your previous jack. For a foot plate that could be easily removed if needed you would want the part # PS1400700340. I attached a review video for this jack for you to check out as well.
view full answer... - Footplate Recommendation for the Pro Series Trailer Jack # PS1401000303 The recommended foot plate for use with the Pro Series Trailer Jack # PS1401000303 is part # PS1400700340. If you wanted a wheel caster instead you would want the part # PS1400750340.
view full answer...
Do you have a question about this Trailer Jack?
Used Items Available
Condition: Like New
Notes: May have damaged packaging or minor cosmetic blemishes.
Info for this part was:
Written by:
Lindsey S
Expert Research:
Michael H
Expert Research:
Jameson C
Updated by:
Laura H
Updated by:
Wilson B
Updated by:
Alexander C
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Susan
3/17/2015
Which trailer jack did buy? Model and brand. Thanks